Grid view List view

Showing 37–48 of 49 resultsSorted by price: low to high

[Out of Stock] Used Air Separation Table, 6,000 lbs/hr, Model C5-TOOut of stock

[Out of Stock] Used Air Separation Table, 6,000 lbs/hr, Model C5-TO

$53,000.00

[Out of Stock] Used air separation table, 6,000 lbs/hr throughput*, model C5-TO

C5-TO air separation table capable of separating up to 6,000 lbs/hr*

  • 12.712 sq. ft. of separation area
  • Constructed in carbon steel
  • Full dust hood
  • 5HP, TEFC 360/230/460 3-phase electric motor
  • Power station mounted on pedestal including all disconnects and motor controls
  • 2 stainless steel deck covers for the separation surface
  • Filter with filter-box providing a clean air supply to the separating table
  • Stand alone 10HP industrial dust collector. 220V/440V, 3-phase, TEFC, 26A/13A, 3450 RPM. Air suction capacity: 5360 CFM

*Separation/hr depends on the % of copper content and on the equipment feeding the system

Contact for Quote
Used Hosokawa Polymer Systems 1626 100 HP low profile granulatorOut of stock

[Out of Stock] Used Hosokawa Polymer Systems 1626 100 HP Low Profile Granulator

$55,000.00

[Out of Stock] Used Hosokawa Polymer Systems 1626 100 HP low profile granulator

Specs and features:

  • ⁠Designed and manufactured in the USA
  • 100 HP, 460V / 3 phase / 60hz electric motor
  • NEMA 12 freestanding control panel
  • Spare knives
  • 5/16″ screen
  • Vacuum take-off bin
  • 60″W x 68″L x 86″H
  • Weight: 7,000 lbs
  • ⁠Heavy solid steel (not cast) flywheel in place of standard pulley
  • All spare parts are readily available in the USA

Optional at an additional cost:

  • Soft start electrical starter
Contact for Quote
used 2018 magnapower magstar ms1200 hisc drum separator side view

Used Magnapower Magstar MS1200 for Stainless Steel Recovery

$68,000.00

Used Magnapower Magstar MS1200 HISC Drum Separator for Stainless Steel Recovery

Magnapower’s Magstar MS1200 HISC drum separator is best suited for weakly magnetic materials that a standard low-intensity drum magnet misses. It’s main application is for recovering materials like stainless steel from mixed scrap streams in the 25-50mm range. This drum separator is typically used at a pre-sorting stage, often downstream from a primary drum magnet that separates the highly magnetic fraction first. See our magnet video and article here.

Contact for Quote
Used Baghouse Dust Collector

Used Baghouse Dust Collector

$80,000.00

Used baghouse dust collector Mac Process 75,000 cfm round-type

• Model 144MCF572
• Sectional construction
• 3 ring sections (this model normally only has 2)
• Automatic pulse clean system
• Access ladder and service platform
• Steel support structure

Contact for Quote
[Out of Stock] Used Heavy Duty 150HP Single Shaft ShredderOut of stock

[Out of Stock] Used Heavy Duty 150HP Single Shaft Shredder

$85,000.00

[Out of Stock] Used Heavy Duty 150HP Single Shaft Shredder

Description:
• With hydraulic pushing ram
• 1,533 use hours
• Built in 2018
• Commissioned in 2019

Specs:
• Rotor speed: 63rpm
• Rotor diameter: 480mm
• Rotor blades: 59
• Static blades: 3
• Ram chamber: 815mm
• Discharge height: 675mm
• Screen diameter (holes): 40mm
• Motor power: 110kw (150HP)
• Hydraulic power: 5.5kw (7.5HP)
• Chamber size: 1,462mm x 1,204mm
• Overall dimension: 2,843mm x 3,044mm x 2,307mm
• Approximate weight: 11,000kg

Contact for Quote
[Out of Stock] Javelin 48" Eddy Current Separator - Model ESC481690RA043Out of stock

[Out of Stock] Javelin 48″ Eddy Current Separator – Model ESC481690RA043

$86,000.00

[Out of Stock] Industrial Magnetics (Javelin) eddy current separator, model ESC481690RA043, 48″ wide, 16 pole

  • New in 2019
  • Used in a test facility
  • Low hours

Unit will be equipped as follows:

  • High polarity fines rotor using N52 magnets
  • Rulmeca® internal drive pulley
  • Polyurethane belt with hidden stainless steel splice
  • Belt effective width between corrugated side walls is 48”
  • 90” length between front end centerline to rear pulley centerline
  • 10” OD carbon fiber shell
  • Single cut splitter box
  • Unit will be designed to run at 3,000 RPM
  • Material size to be sorted: 2” and below
Contact for Quote
[Out of Stock] Used American Plulverizer Model 4800 RingmillOut of stock

[Out of Stock] Used American Plulverizer Model 4800 Ringmill

$135,000.00

[Out of Stock] Used American Plulverizer Model 4800 Ringmill

Model SVE 800/ X2200
• New in 2018
• New Rings and Pins
• 300hp 480v
• Hinged Reject Chute
• Hydraulic Screen Cradle
• Mill is equipped with a fire suppression system
• Controls available*
*This was part of a larger system that included Infeed Pit conveyor, under Mill oscillator, exit conveyor Magnets, eddy current, etc. These additional items are also available.

Contact for Quote
[Out of Stock] Used Vertical Impact Mill Model CMIMV-2000Out of stock

[Out of Stock] Used Vertical Impact Mill Model CMIMV-2000

$148,000.00

[Out of Stock] Used Vertical Impact Mill Model CMIMV-2000 with control cabinet and infeed conveyor

CMIM Vertical Impact Mill Model V2000
• 200hp 3ph 480V electrical motor.
• Dims (inches): 101.5 x 153 x 134.5
• Hardened Impact Bars
• Ribbed Interchangeable Wear Plates
• Interchangeable screens
• Controls (VFD) included + Infeed conveyor

Applications:
• Pre-shredded Li-ion battery scrap
• Pre-shredded electric cables (copper and plastic)
• Pre-shredded electric cables (aluminium and plastic)
• Pre-shredded ASR
• Pre-shredded electronic scrap
• Pre-shredded Aluminium and copper radiators
• Pre-shredded Aluminium cans

Contact for Quote
Used 200 HP Turbo MillOut of stock

[Out of Stock] Used 200 HP Turbo Mill

$165,000.00

[Out of Stock] Used 200 HP turbo mill

The CMTM-1500 200 HP turbo mill is designed to grind rigid and semi-rigid materials into a fine particle size smaller than 1/16″ in diameter. It’s especially apt at processing hair wires and fine strand materials.

Turbomill:
• 200hp TEFC 360/230/460 3ph electric motor.
• Carbon steel plate body.
• Easily interchangeable steel wear-plates and beater knives.
• Clam-shell design for easy opening.

CMBL-4:
• 50hp blower W-VFD
• Cyclone
• Airlock

Controls Cabinet:
• 200 HP VFD for Turbo*
• 50 hp VFD for Blower*
• Motor starter for airlock
• 5hp VFD for infeed hopper. (not included in sale price, but available)

*VFD needed to properly operate. (included)
A blower, cyclone, and air-lock valve are required in order to pull the material thru the Turbo Mill. (Included)

Contact for Quote
[Out of Stock] Used 300HP SSI Quad Shaft ShredderOut of stock

[Out of Stock] Used 300HP SSI Quad Shaft Shredder

$480,000.00

[Out of Stock] Used 300HP SSI Quad Shaft Shredder

SSI Shredder
Model Q100ED (63) Sealed chamber.
Newly rebuilt head with new knives (By SSI Technician in 2023)
• (2) 150 HP Motors
• Cutting Chamber Opening Size: 62″ x 63″
• 2.5″ Screen
• 17 Blades per Shaft
• 2 Hooks per Blade
• 2010 Model
• 3700 HRS (20 on new knives)
• Old knives are included and can be resurfaced.
• Hopper extension is available.
• Controls are included; it is operational and still powered up.

Conveyor with hood
• Kuhne Brand, Model: GBF 325 – 8.6 – 2
• 80” Wide
• 29’ long
• Integrated hood.
• The lower sheet metal guard plate is bent but still operational.
• Loaded on Truck

Contact for Quote