Grid view List view

Showing 25–36 of 50 resultsSorted by price: low to high

[Out of Stock] NEW SWECO Round Separator Model CL60S88—60 Inch Dia.Out of stock

[Out of Stock] NEW SWECO Round Separator Model CL60S88—60 Inch Dia.

$24,000.00

[Out of Stock] NEW Sweco Round Separator Model CL60S88, 60 Inch Dia., Classic SWECO VIBRO-ENERGY

New Never used
• 60” single deck (35 mesh screen installed, will come with specified screen)
• 460V 1200 RPM 2.5HP Motor.
• Carbon steel base and lower table assembly, twelve (12) spring assemblies and a 2-1/2 horsepower 460 volt, 3 phase, 60 cycle, 1200 rpm, TENV motion generator.
Component Parts:
• One (1) 8” table frame of stainless-steel construction, including one (1) 6” x 8” discharge spout and one (1) standard clamp ring. One (1) 8” spacing frame of stainless-steel construction, including one (1) 6” x 8” discharge spout and one (1) standard clamp ring.
• One (1) Installed Screen: 35-Mesh Size
• One (1) 60” domed cover assembly of stainless-steel construction with an 8” charge port and 6” inspection opening, assembly to include FDA approved white neoprene cover for I/O, 60” tension ring with gasket and clamp ring assembly.

Contact for Quote
used rotex 403a-al-ms triple deck screener disconnected with mezzanine right viewused rotex 403a-al-ms triple deck screener disconnected with mezzanine front view

Used Rotex 403A-AL-MS Triple Deck Screener With Mezzanine

$28,000.00

Used Rotex 403A-AL-MS Triple Deck Screener Features and Specs

Rotex’s 403A-AL-MS triple deck screener is a versatile piece of recycling and processing equipment, suited for separating mixed material streams into multiple size fractions. Its main application is dry bulk classification, sorting materials like scrap, crushed glass, plastic regrind, or wood into up to four distinct fractions across its 60″ x 30″ screening area. This screener is mostly used for sizing and purification, though it really depends on the material stream and facility needs.

Contact for Quote
Used CM Mini Copper Wire Granulator

Used CM Mini Copper Wire Granulator

$30,000.00

Used CM Mini Copper Wire Granulator

• 100% made in the US

• Built in 2021

• Comes with 4 sets of knives/beds, 2 of them are brand new

• Comes with 3 table screens, 2 of which are brand new

Contact for Quote
NEW Dosing Feed Hopper—108cu ft

NEW Dosing Feed Hopper—108cu ft

$30,800.00

New Dosing Feed Hopper, Standard Version, 108cu ft

• Overall Size 164”Lx60”Wx96”H
• Hopper capacity ≈ 108cu ft*
• Hopper size 96”Lx56”Wx61”H
• Auger size 9”
• Motor: 1hp 3phase Inverter duty
• Gearbox: Extreme torque SEW Gear Motor, Ratio 193:1, 9.1 RPM, Output 2.375″ Hollow Shaft, Mounting position M1, 1HP Motor, 460 VAC, 60 HZ, Output Torque 6530 lb-in, torque capacity 26,600 lb-in, S.F. 4.10

*Additional option to extend hopper36” taller to increase capacity from 108 to 220 cubic ft +$2,600.00

Contact for Quote
[Out of Stock] Used Air Separation Table, 1,800 lbs/hr, Model C2-TOOut of stock

[Out of Stock] Used Air Separation Table, 1,800 lbs/hr, Model C2-TO

$32,000.00

[Out of Stock] Used air separation table, 1,800 lbs/hr throughput, model C2-TO

C2 air separation table capable of separating up to 1,800 lbs/hr*

  • 2.5 sq. ft. of separation area
  • Constructed in carbon steel
  • Full dust hood
  • 1HP TEFC 360/230/460 3-phase electric motor
  • Filter with filter-box providing a clean air supply to the separating table

*Separation/hr depends on the % of copper content and on the equipment feeding the system

Contact for Quote
Used heavy duty granulator for wire chopping.

Used 1624CM Granulator

$33,100.00

Used 1624CM Granulator

  • Large part Granulator
  • Made in the USA
  • 40 HP
  • 240v/480v
  • 3 phase motor
  • Vacuum take-off bin
    • All spare parts are readily available in the USA
Contact for Quote
dosing feed hopper 175 cu ft capacity with screw auger front viewdosing feed hopper 175 cu ft capacity with screw auger right side view 2

New Dosing Feed Hopper 175 cu ft Capacity with Metering Screw Auger

$39,760.00

New Dosing Feed Hopper 175 ft³ with Screw Auger Features and Specs

This dosing feed hopper is designed for accurate, continuous metering of bulk solid material into downstream processing. Its large 175 ft³ hopper capacity supports sustained feeding without frequent refilling and the 9″ diameter auger delivers consistent, controlled output. The dosing hopper runs slow and steady while producing enough output torque to reliably push dense or heavy bulk material through without stalling, surging, or clogging. The entire unit was built for dry applications for continuous operation.

Contact for Quote
[Out of Stock] Used Hustler Pit ConveyorOut of stock

[Out of Stock] Used Hustler Pit Conveyor

$40,000.00

[Out of Stock] Used Hustler Pit Conveyor

Rubber over Steel rollers with scalping plate for metering material.

Dimensions:
• 40’ long
• 13-8 Tall
• 48” wide
• 11’-7” discharge height
• 8’ load area
• 2’-6” top flat section.

Features:
• Auto-Oiler
• Adjustable material splitter (For metering lose material)
• Reversible Gearbox
• Pit plates included

It was used to feed a 300hp, model 4800 American Pulverizer ring mill. (also available with controls)

Contact for Quote
Desislava 120 HP Granulator 500-800

Used 120 HP Desislava Granulator 500/800

$43,000.00

120 HP Desislava 20 Granulator 500/800, used for copper and plastics

Specs and features:

  • Double scissor / double angle cut granulator
  • 5 fly blades
  • 2 bed blades
  • 460V / 3 phase / 60 hz electric motor
  • 5/16″ screen
  • Vacuum take-off bin
  • Approximate weight: 15,000 lbs
  • Chamber opening: 20″ x 31″
  • Rotor type: open style, 5 rows
  • Front and back bed blades 2 rows (2 blades on each row)
  • Cutting diameter: 500mm x 800mm
Contact for Quote