Showing all 6 results

Turbo Mill

CMTM-1000 Turbo Mill

Call for Price

CMTM-1000 Turbo Mill

Fine Hair Wires Solution.
  • Are copper fines getting thru your granulator screen with insulation still on the wire?
  • Are you having to run your material thru your system more than once to make sure it's clean?
  • Are you losing hair wires in your tailings?

A Turbo Mill is the only screen-less system that will take your copper fines and tumble them into little balls.

These little balls react just like the coarse copper on the separation tables removing the “clumpy” factor.

The extremely high speeds and rolling action removes any remaining insulation that may still be on your wires.

The material is vacuumed thru the drum horizontally and gets pulverized and rolled as it travels thru to the evacuation port.

The process is caused by multiple blunt edge blades that do not need a opposite cutting or “bed” knife. This results in a maintenance schedule that is less than 1/50 of a conventional Granulator.

PC Line 150 Electronics Recycling System

Call for Price

CM EUROLINE PC150 Electronics recycling system.

All in one contained system for Processing the following:

  • Circuit boards
  • Complete Electronic Cards
  • Mixed Electric Cables (pre-shredded) (copper / aluminum / plastic)
  • Radiators (pre-shredded) (copper / aluminum)
  • Heating & cooling pipes (pre-shredded)
  • Complete Caps (aluminum/plastic)

CAPACITY:

  • 200-300lbs/ hr based on size of feedstock

SYSTEM FEATURES:

  • Hammer-mill CMHM750 (20hp)
  • Turbo-mill CMTM-250-CL (10hp standard) (or 15hp special order)
  • Zig-Zag separator
  • Pneumatic conveyor
  • Density Separator C1Euroline

Optional:

  • Takeaway conveyor (1hp)
  • “Shake” overhead magnetic conveyor (1hp)
PDF SPEC SHEET
Turbo MillTurbo Mill

CMTM-500 Turbo Mill

Call for Price

CMTM-500 Turbo Mill

Fine Hair Wires Solution.

  • Are copper fines getting thru your granulator screen with insulation still on the wire?
  • Are you having to run your material thru your system more than once to make sure it's clean?
  • Are you losing hair wires in your tailings?

A Turbo Mill is the only screen-less system that will take your copper fines and tumble them into little balls.

These little balls react just like the coarse copper on the separation tables removing the “clumpy” factor.

The extremely high speeds and rolling action removes any remaining insulation that may still be on your wires.

The material is vacuumed thru the drum horizontally and gets pulverized and rolled as it travels thru to the evacuation port.

The process is caused by multiple blunt edge blades that do not need a opposite cutting or “bed” knife. This results in a maintenance schedule that is less than 1/50 of a conventional Granulator.

CMIM-2416 Impact MillCMIM-2416 Impact Mill

CMIM-2416 Impact Mill

Call for Price

CMIM-2416 Impact Mill

Designed to process:

  • E-scrap
  • Small Appliances
  • Hand Tools (Drills, Saws etc.)
  • Ballast
  • Copper Bearing Steel Scrap
  • Copper & Aluminum Transformers
  • Brass Valves, Plumbing Fittings & Faucets
  • Motor Stators
  • Aluminum-copper Radiators with Ends
  • Copper, Brass, & Aluminum Lugs

SYSTEM FEATURES:

  • Motor 30hp 3 phase electrical motor
  • Belt Driven
  • Reverse Hopper for easy loading and material retention.
  • Weight: 3500lbs
  • Conveyor discharge height stand .
  • Reversible impact bars for additional life.
  • High throughput, small footprint.
  • Replaceable impact bars, case liners, and screens.
CMTM-150 Turbo Mill

CMTM-150 Turbo Mill

Call for Price

CMTM-150 Turbo Mill

The CMTM-150 turbo mill is designed to grind rigid and semi rigid
materials into a fine particle sizes smaller than 1/16″ in diameter.

  • Capacity of the machine is determined by the rigidity of the materials and particle size.
  • 10hp TEFC 360/230/460 3ph electric motor (15hp available for more throughput)
  • Carbon steel plate body.
  • Easily interchangeable steel wear plates and beater knives.
  • Dims: 46″x22″x22″
  • (Priced with 10hp option, throughput of up to 300lbs/hr)

NOTE: A blower, cyclone and air-lock valve are required in order to pull
the material thru the Turbo Mill.

OPTIONAL: The following options are available at an additional cost.

  • VFD (for speed control) $1,200
  • 15hp Motor *up to 450lbs/hr +$400

CMIM-1609 Impact Mill

Call for Price

CMIM-1609 Impact Mill

Designed to process:

  • Hard drives, small e-scrap, (Cell phones, memory, etc.)
  • Medical waste
  • Copper Bearing Steel Scrap

SYSTEM FEATURES:

  • Motor 5 to 7.5hp 3 phase electrical motor (available in single phase)
  • Belt Driven
  • Reverse Hopper for easy loading and material retention.
  • Weight: approximately 1500lbs
  • Standard box discharge. (Conveyor height discharge available)
  • Reversible impact bars for additional life.
  • High throughput, small footprint.
  • Replaceable impact bars, case liners, and screens.