Wire Chopping Systems

 

C1 Wire Chopping Line / Copper Separator with 25HP Granulator

Call for Price

C1 Wire Chopping Line / Copper Separator with 25HP Granulator

The C1 system with 25hp granulator will enable you to separate different density materials such as (copper / plastic), (aluminum / plastic), (aluminum / copper) and much more.
The C1 comes with a 7.5hp Baldor blower to air-convey the copper chops from the 25hp granulator to the separation table.
The separation table is powered by a 1hp Baldor motor.
All of the dust is evacuated by a 3hp dual bag dust collector.

With the 25hp granulator,(included) It will chop and separate 400-600lbs/hr of regular house wire chopped with a 3/16 screen

-Upgradable to “C1-Turbo”, with an additional Turbo Mill in-line you will increase your throughput by up to 40% and be able to process even fine wires in a single pass.

C2 Wire Chopping Line / Copper Separator with 40HP Granulator

Call for Price

C2 system with 40hp granulator

(MADE IN THE USA)

This system will enable you to separate different density materials such as (copper / plastic), (aluminum / plastic), (aluminum / copper) and much more.
The C2 comes with a 10hp blower to air-convey the copper chops from the 40hp granulator to the separation table.
The separation table is powered by a 1hp motor.
All of the dust is evacuated by a 5hp dual bag dust collector..

With the 40hp granulator,(included) It will chop and separate 600-800lbs/hr of regular house wire chopped with a 3/16 screen

-Upgradable to “C2-Turbo”, with an additional Turbo Mill in-line you will increase your throughput by up to 40% and be able to process even fine wires in a single pass.

C4 Turbo Plant Deluxe

Call for Price

C4 Turbo Plant Deluxe

Designed and manufactured in the USA, this turn-key plant will enable you to process wire smaller than telephone wire all the way up to large multi conductor 1000mcm.

Pricing includes setup and training in the continental United States.

C4 Wire Chopping Line / Copper Separator with 100HP Granulator

Call for Price

C4 system with 100hp granulator

(MADE IN THE USA)

This system will enable you to separate different density materials such as (copper / plastic), (aluminum / plastic), (aluminum / copper) and much more.
The C4 Wire chopping line comes with a 15hp blower to air-convey the copper chops from the granulator to the separation table.
The separation table is powered by a 5hp motor.
All of the dust is evacuated by a 10hp dual bag dust collector..

With the 100hp granulator,(included) It will chop and separate 3000-4000lbs/hr* of regular house wire chopped with a 5/16 screen.

(*it will take 4-5 operators to consistently feed the granulator that fast. A pre-shredder is highly recommended to automatically feed the granulator for higher production).

-Up-gradable to “C4-Turbo Plant”, with an additional Turbo Mill in-line and shredder you will increase your throughput by up to 40% and be able to process even fine wires in a single pass.

CM-Mini

Call for Price

CM-Mini

All-in-one Wire Chopper & Table Sorter

Designed and manufactured in the USA, the CM-Mini is an entire wire chopping plant condensed into a single, low-profile, easy to set-up and use machine.