C4 Wire Chopping Line / Copper Separator with 100HP Granulator

Call for Price

C4 system with 100hp granulator

(MADE IN THE USA)

This system will enable you to separate different density materials such as (copper / plastic), (aluminum / plastic), (aluminum / copper) and much more.
The C4 Wire chopping line comes with a 15hp blower to air-convey the copper chops from the granulator to the separation table.
The separation table is powered by a 5hp motor.
All of the dust is evacuated by a 10hp dual bag dust collector..

With the 100hp granulator,(included) It will chop and separate 3000-4000lbs/hr* of regular house wire chopped with a 5/16 screen.

(*it will take 4-5 operators to consistently feed the granulator that fast. A pre-shredder is highly recommended to automatically feed the granulator for higher production).

-Up-gradable to “C4-Turbo Plant”, with an additional Turbo Mill in-line and shredder you will increase your throughput by up to 40% and be able to process even fine wires in a single pass.

Category: SKU: C4-100 Tag:

Description

*Custom systems from 200 lbs – 10,000 lbs/hr available.*

C4 Wire chopping line :

Item#1 Conveyor with magnetic head pulley:

  • 24″ wide belt.
  • 28″ overall width.
  • 90″ discharge height at 30° incline.
  • 192″ long.
  • 169″ long floor space.
  • 1/2 hp drive motor.
  • 65 FPM
  • 3-Ply belt.
  • Easily discharge into granulator or Gaylord box.

    • (without magnetic head pulley substract $2,600)

 
Item#2 2031CMHD, Low Profile Granulator

  • 100HP 460v/3ph/60hz electric motor.
  • Freestanding Control Panel
  • spare knives
  • 5/16″ screen
  • Vacuum take-off bin.
  • Approximate Weight: 15,212 lbs
  • Chamber opening: 20″x31″

    • (all spare parts are readily available in the USA) One year warranty on all parts except wear parts.

 
Item#3 C4 New Air separation system capable of  separating up to 4000-5000lbs/hr*

  • 9.07  sq. ft. of separation area
  • Constructed in carbon steel
  • Full dust hood
  • 5 HP, TEFC 360/230/460 3ph electric motor
  • Power station mounted on pedestal including all disconnects and motor controls(SPECIFY VOLTAGE)
  • 2 Stainless steel deck covers for the separation surface
  • Filter with filter-box providing a clean air supply to the separating table

*Separation/hr depends on copper % content and on equipment feeding the system.

 
Item#4 Industrial Dust Collector

  • Stand alone 10HP industrial dust collector. 220V/440V*, 3-phase, TEFC, 26A/13A, 3450 RPM. Air suction capacity: 5360 CFM

Related products