Turbo Mills

 

Turbo Mill

CMTM-1000 Turbo Mill

Call for Price

CMTM-1000 Turbo Mill

Fine Hair Wires Solution.
  • Are copper fines getting thru your granulator screen with insulation still on the wire?
  • Are you having to run your material thru your system more than once to make sure it's clean?
  • Are you losing hair wires in your tailings?

A Turbo Mill is the only screen-less system that will take your copper fines and tumble them into little balls.

These little balls react just like the coarse copper on the separation tables removing the “clumpy” factor.

The extremely high speeds and rolling action removes any remaining insulation that may still be on your wires.

The material is vacuumed thru the drum horizontally and gets pulverized and rolled as it travels thru to the evacuation port.

The process is caused by multiple blunt edge blades that do not need a opposite cutting or “bed” knife. This results in a maintenance schedule that is less than 1/50 of a conventional Granulator.

CMTM-150 Turbo Mill

CMTM-150 Turbo Mill

Call for Price

CMTM-150 Turbo Mill

The CMTM-150 turbo mill is designed to grind rigid and semi rigid
materials into a fine particle sizes smaller than 1/16″ in diameter.

  • Capacity of the machine is determined by the rigidity of the materials and particle size.
  • 10hp TEFC 360/230/460 3ph electric motor (15hp available for more throughput)
  • Carbon steel plate body.
  • Easily interchangeable steel wear plates and beater knives.
  • Dims: 46″x22″x22″
  • (Priced with 10hp option, throughput of up to 300lbs/hr)

NOTE: A blower, cyclone and air-lock valve are required in order to pull
the material thru the Turbo Mill.

OPTIONAL: The following options are available at an additional cost.

  • VFD (for speed control) $1,200
  • 15hp Motor *up to 450lbs/hr +$400
Turbo MillTurbo Mill

CMTM-250 Turbo Mill

Call for Price

CMTM-250 Turbo Mill

Fine Hair Wires Solution.

  • Are copper fines getting thru your granulator screen with insulation still on the wire?
  • Are you having to run your material thru your system more than once to make sure it's clean?
  • Are you losing hair wires in your tailings?

A Turbo Mill is the only screen-less system that will take your copper fines and tumble them into little balls.

These little balls react just like the coarse copper on the separation tables removing the “clumpy” factor.

The extremely high speeds and rolling action removes any remaining insulation that may still be on your wires.

The material is vacuumed thru the drum horizontally and gets pulverized and rolled as it travels thru to the evacuation port.

The process is caused by multiple blunt edge blades that do not need a opposite cutting or “bed” knife. This results in a maintenance schedule that is less than 1/50 of a conventional Granulator.

Turbo MillTurbo Mill

CMTM-500 Turbo Mill

Call for Price

CMTM-500 Turbo Mill

Fine Hair Wires Solution.

  • Are copper fines getting thru your granulator screen with insulation still on the wire?
  • Are you having to run your material thru your system more than once to make sure it's clean?
  • Are you losing hair wires in your tailings?

A Turbo Mill is the only screen-less system that will take your copper fines and tumble them into little balls.

These little balls react just like the coarse copper on the separation tables removing the “clumpy” factor.

The extremely high speeds and rolling action removes any remaining insulation that may still be on your wires.

The material is vacuumed thru the drum horizontally and gets pulverized and rolled as it travels thru to the evacuation port.

The process is caused by multiple blunt edge blades that do not need a opposite cutting or “bed” knife. This results in a maintenance schedule that is less than 1/50 of a conventional Granulator.