Showing all 7 results

CM-Mini

Call for Price

CM-Mini

All-in-one Wire Chopper & Table Sorter

Designed and manufactured in the USA, the CM-Mini is an entire wire chopping plant condensed into a single, low-profile, easy to set-up and use machine.

1120CM Granulator1120CM cable Granulator

1120CM Granulator (25hp)

Call for Price

1120CM Granulator

Our granulators are available with a wide range of automation components such as special hoppers for combination robotic and manual feed; conveyor feed; oversize part, etc.; vacuum take-off bin for regrind evacuation and blower evacuation systems of various sizes, complete with unloading bins and cyclone separators.

Double Angle Cut™ Counter-slanted rotor and bed knives provide a high shear cutting action that achieves clean, uniform granulate, with very low dust and fines at high throughput rates with less noise, lower energy consumption and heat buildup. The rotor diameter of our granulators are greater than the feed opening, allowing clear, unobstructed access to the cutting chamber utilizing every inch of the cutting circle. This unique design maximizes the capacity and throughput by eliminating bottlenecks at the entrance, and increasing the effective screen area.

3147CMSD Super Duty Granulator3147CMSD Super Duty Granulator

3147CMSD Super Duty Granulator

Call for Price

3147CMSD Super Duty Granulator

SPECS & FEATURES:

  • 200HP 460v/3ph/60hz electric motor.
  • Freestanding Control Panel
  • spare knives
  • 5/16″ screen
  • Vacuum take-off bin.
  • Weight: 26,300 lbs
  • Chamber opening: 31″x47″
  • (all spare parts are readily available in the USA)

OPTIONAL:
The following options are available at an additional cost.

  • Soft start electrical starter
  • Automated in-feed conveyor
1626CMHD Low Profile Granulator1626CMHD Low Profile Granulator

1626CMHD-100 Low Profile Granulator

Call for Price

1626CMHD-100 Low Profile Granulator

SPECS & FEATURES:

  • Designed and manufactured in the USA
  • 100HP 460v/3ph/60hz electric motor.
  • NEMA 12 Freestanding Control Panel
  • spare knives
  • 5/16″ screen
  • Vacuum take-off bin.
  • 60″Wx68″Lx86″H
  • Weight 7000 lbs
  • (all spare parts are readily available in the USA)

OPTIONAL:
The following options are available at an additional cost.

  • Heavy solid steel (not cast) flywheel in place of standard pulley ($4,500)
  • Hardfaced Cutting Chamber ($4,975)
  • Soft start electrical starter
  • Automated in-feed conveyor
1626CMHD Low Profile Granulator1626CMHD Low Profile Granulator

1626CMHD-50 Low Profile Granulator

Call for Price

1626CMHD-50 Low Profile Granulator

SPECS & FEATURES:

  • Designed and manufactured in the USA
  • 50HP 460v/3ph/60hz electric motor.
  • NEMA 12 Freestanding Control Panel
  • spare knives
  • 5/16″ screen
  • Vacuum take-off bin.
  • (all spare parts are readily available in the USA)

OPTIONAL:
The following options are available at an additional cost.

  • Heavy solid steel (not cast) flywheel in place of standard pulley ($4,500)
  • Hardfaced Cutting Chamber ($4,975)
  • Soft start electrical starter
  • 100hp electrical motor
  • Automated in-feed conveyor

CMGRCN-40-1331 Heavy Duty Granulator

Call for Price

CMGRCN-40-1331 Heavy Duty Granulator

SPECS & FEATURES:

  • 40HP 460v/3ph/60hz electric motor.
  • Freestanding Control Panel
  • spare knives
  • 5/16″ screen
  • Vacuum take-off bin.
  • Approximate Weight: 5,000 lbs
  • Hopper Opening: 24″x30″
  • Chamber size: 13″x31″
  • Overal Dimensions: 56″x54″87″
  • Easy to operate & maintain
  • Customizable designs with limitless capabilities
  • Optional integral blower on hinged door

(all spare parts are readily available in the USA)

OPTIONAL:
The following options are available at an additional cost.

  • Soft start electrical starter
  • Automated in-feed conveyor

CMGRCN-100-2031 Super Duty Granulator

Call for Price

CMGRCN-100-2031 Super Duty Granulator

SPECS & FEATURES:

  • 120HP 460v/3ph/60hz electric motor.
  • Freestanding Control Panel
  • 5/16″ screen
  • Vacuum take-off bin.
  • Vacuum take-off bin.
  • Approximate Weight: 10,000 lbs
  • Hopper Opening: 29″x31″
  • Chamber size: 20″x31″

(all spare parts are readily available in the USA)

OPTIONAL:
The following options are available at an additional cost.

  • Automated in-feed conveyor